Battery Pack

Contact

TDMG Inc

100 Alexis Nihon, Suite 102

St Laurent, Quebec

H4M 2N6

Contact Us

(514) 381-9115

*info@tdmginc.com

BATTERY PACK

One of TDMG`s customer developed a new technology battery system which could function in high temperature conditions, making the battery an ideal candidate for indoor and outdoor telecommunications enclosures. The battery required a compression system to hold all the cells together at pre-determined compression levels. TDMG developed a compression system that would allow the required compression level to be maintained throughout the surface of each cell. Since the cells were approximately 6 x 8 inches, the compression system had to be sufficiently rigid to avoid warping and thus create uneven pressure distribution at the cells. The compression system also to be light in order that it could be handled easily as well as providing cable management features.

The final design involved a spring loaded polypropylene / aluminium design which permitted easy attachment of the battery and related cables. In order to assess the pressure distribution, a finite element stress analysis was performed using Ansys Workbench. The analysis demonstrated that the pressure variations in the cells were within limits, meeting the design specifications.

If you have any questions regarding the above or for a specific design question which you may have, please contact us and we will be pleased to help you.

Click here to request additional information.

PRODUCT DEVELOPMENT

Disclaimer l Feedback